Genuine SCHIZZO® Motor Paint

DIRECTIONS: The substrate must be clean, dry and free of grease. Possibly pre-treat the surface with a wire brush. Carefully remove the grinding dust. Mask surfaces and parts that are not to be painted. Shake can for at least 2 minutes before use. Test spray. Processing temperature at least 18°C. Spray distance approx. 30cm. Two or three THIN coats give the best result. Touchdry after approx. 2 hours. Fully dry after

3-4 days. For drying acceleration, the paint can also be heated at about 80°C. To clean the spray head, spray the can on the head until no paint is coming out the spray jet.

DANGER: Extremely flammable. Container is under pressure. May burst if heated. Causes serious eye irritation. May cause drowsiness and dizziness. Repeated exposure may cause skin dryness or cracking. If medical advice is needed, have container or label at hand. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke during processing. Do not spray against flame or other source of ignition. Do not puncture or burn. Do not inhale contents. Protect from sun radiation. Do not expose to temperatures above 50°C. Dispose of contents / container in accordance with local regulations. Without adequate ventilation formation of explosive mixtures possible.

Use at your own risk and exclusively according to the purpose.

CONTAINS: acetone, propane, n-butane, n-buty acetate and xylene.